Mini-ITX Pentium M Embedded Motherboard (170 x 170 mm) Intel mPGA478 Pentium M @ 400/533 MHz FSB, 1 GB DDR SDRAM Intel Extreme Graphics, 64 MB shared with system memory , S-video and Composite TV-out, Optional LVDS / DVI interface Intel 82541PI Gigabit Ethernet controller, 2 x Mini-PCI socket, 5.1-Channel, USB 2.0, GPIO, IrDA, SPDIF, IEEE 1394

Specification

Form Factor Mini-ITX form factor at 170 x 170 mm CPU Micro-FCPGA 478 Mobile Intel Pentium M / Celeron M CPU up to 2.26 GHz @ 400/533 MHz FSB Memory One 184-pin DIMM socket Support up to 1 GBytes DDR 200/266/333 SDRAM Chipset Intel high performance chipset Watchdog Timer Generates a system reset with internal timer for 1 to 255 sec. Power Management ACPI 2.0 compliant, supports power saving mode . Real Time Clock Intel ICH4 built-in RTC with onboard lithium battery PCI Enhanced IDE 40-pin UltraATA/100 bus master IDE channels And one onboard 44-pin IDE connector VGA Interface Built-in Intel Extreme Graphics Video Memory up to 64 MB shared with system External DB15 female connector on rear I/O panel LVDS/DVI Interface DVI interface TV-out Interface S-video & Composite TV-out LAN Interface Intel 82541PI Giga Mbps Ethernet interface Audio Interface Onboard ACL655 AC97 3D audio codec 5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface Hi-Speed USB 2.0 Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface with 480 Mbps of data transfer rate and bootable setting in BIOS Multi-I/O Port 1 x RS232 & 1 x RS232/422/485, 1 x parallel, 4 x USB 2.0, 1 x IrDA, 1 x FDD, 8-bit GPIO, 1 x PS/2 keyboard and mouse port. Solid State Disk IDE support DiskOn Module with +5V power supply Expansive Slot One 32-bit PCI slot supports 2 bus master PCI via riser card, and 2 x Mini-PCI Environment Power Requirement: Standard 20/24-pin ATX power supply Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor Operation Temperature: 0 ~ 60oC (32 ~ 140oF)