Carte mère industrielle au format 3,5" NF36-2600 Agrandir l'image

Carte mère industrielle au format 3,5" NF36-2600

CMJEJNF36-2600

Jetway

Carte mère 3.5 pouces, processeur N2600 1.6GHz,
1* DDRIII 800MHz up to 2GB, Mini PCI-E, Cfast,
connecteur ATAII 3Gb/s, 4* USB 2.0 + 2* USB 2.0 header, 2* RJ45, DVI, 12V DC-IN JACK, 4* COM header

Plus de détails

Carte mère au format 3.5 pouces avec processeur INTEL Cedar Trail-M N2600 1.6GHz

- 3rd Generation Intel® Atom Dual Core N2600 N2800 D2550
- Embedded Long-life Series, 5 Year Availability
- 3.5" SBC Form Factor Design for Fanless Systems
- 12V DC jack on back panel for external power supply
- Dual Gigabit LAN with Enhanced Surge Protection
- ECO-design for EuP/ErP
Jetway NF36 3.5" SBC Motherboard
Processor3rd Generation Intel® Atom Dual Core N2600 (1.6GHz@3.5W)
3rd Generation Intel® Atom Dual Core N2800 (1.86GHz@6.5W)
3rd Generation Intel® Atom Dual Core D2550 (1.86GHz@10W)
ChipsetIntel NM10
Memory1 x 204-pin DDR3-800 SO-DIMM Single Channel up to 2 GB (N2600)
1 x 204-pin DDR3-800/1066 SO-DIMM Single Channel up to 4 GB (N2800)
GraphicsPowerVR SGX 545 (GMA 3600@400MHz) Integrated Graphic (N2600)
PowerVR SGX 545 (GMA 3650@640MHz) Integrated Graphic (N2800)
AudioRealtek ALC662 HD Audio codec
LAN2 x Realtek RTL8111EVL PCI-E Gigabit Ethernet
Storage1 x SATA2 3Gb/s Connector
1 x Cfast Socket
Super IOFINTEK F71808A
Back Panel Connectors
1 12V DC Jack
1 DVI-I
4 USB 2.0
2 RJ45 LAN (10/100/1000)
1 3.5mm Audio connector (Line-OUT)
Onboard I/O Connectors
1 SATA2 3Gb/s Connector
1 Cfast Socket
1 mini PCI Express x1 Slot (full-size)
3 Serial RS232 COM header
1 Serial RS232/RS422/485 COM header (12V/5V selectable)
2 USB Pin Headers for up to 3 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 18-bit single channel LVDS connector/inverter (PowerVR SGX 545 chipset)
1 8 bit GPIO Header
1 CIR Header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 Fan Header
1 4-pin Floppy Power Output (Male)
Power Supply for NF36
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC